stainless tube steel
"
अच्छी गुणवत्ता GOST 4543 पानी की दीवार पैनल के लिए निर्बाध मिश्र धातु इस्पात पाइप दौर
GOST 4543 Alloy Pipe for Water Wall Pannel This pipe follow the GOST4543 which is for alloyed construction hot-rolled and forged gauged steel with diameter or thickness up to 250mm, and steel with a special surface finish, used in a thermally treated condition and produced in the form of bars, strips and hanks. The mass fraction of phosphorus, sulfur, residual copper, nickel and chromium in steel of all grades shall not exceed the standards specified in table.Category of
EN10217-1 P195TR1 दबाव प्रयोजनों के लिए उच्च आवृत्ति वेल्डेड स्टील ट्यूब
Welded Steel Tubes EN10217-1 P195TR1 P235TR1 P265TR1 for Pressure Purposes EN10217-1 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties Since 2nd century, the welding seam quality increased a lot with fast development of excellent quality steel coil production, welding technology and inspection technology improvement, more welding steel tube sizes are available, and gradually
राउंड एन 10217-2 वेल्डेड स्टील ट्यूब पी 195 जीएच P235GH P265GH 16Mo3 HFW SAW SAKL
EN10217-2 Welded Steel Tubes P195GH P235GH P265GH 16Mo3 HFW SAWH SAWL EN10217-2 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 2: Electric welded non-alloy and alloy steel tubes with specified elevated temperature properties Material: Fully killed steel, Fine grain steel with a ferritic grain size. Steel Names: In accordance with EN10027-1 and CR10260 Manufacture: HFW High frequency welded SAW Submerged arc welded - longiditudinal seam - SAWH
P235GH P265GH 16Mo3 जलमग्न आर्क वेल्डेड स्टील ट्यूबिंग के साथ गैर - सहयोगी / मिश्र धातु इस्पात
EN10217-5 P235GH P265GH 16Mo3 Submerged Arc Welded Steel Tubes with Non-ally and Alloy Steel EN10217-5 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 5: Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties Material: Fully killed steel, Fine grain steel with a ferritic grain size. Steel Names: In accordance with EN10027-1 and CR10260 Manufacture: HFW High frequency welded SAW Submerged arc welded -
एन 10217-4 195TR1 P235TR1 P265TR1 दबाव प्रयोजनों के लिए कार्बन स्टील ट्यूब वेल्डेड
EN10217-4 Welded Steel Tubes for Pressure Purposes EN10217-4 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 4: Electric welded non-alloy steel tubes with specified low temperature properties Material: Fully killed steel, Fine grain steel with a ferritic grain size. Steel Names: In accordance with EN10027-1 and CR10260 Manufacture: HFW High frequency welded SAW Submerged arc welded - longiditudinal seam - SAWH - helical seam - SAWL Welding
एन 10217-6 जलमग्न आर्क वेल्डेड पाइप्स नॉन - मिश्र धातु इस्पात ट्यूब कार्बन स्टील के साथ
EN10217-6 Submerged arc welded non-alloy steel tubes EN10217-6 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 6: Submerged arc welded non-alloy steel tubes with specified low temperature properties Material: Fully killed steel, Fine grain steel with a ferritic grain size. Steel Names: In accordance with EN10027-1 and CR10260 Manufacture: HFW High frequency welded SAW Submerged arc welded - longiditudinal seam - SAWH - helical seam - SAWL
तरल GB / T 12771 के लिए TORICH Dia 4-1200mm 316 / 316L स्टेनलेस स्टील पाइप वेल्डेड स्टील ट्यूब
TORICH Diameter 4-1200mm Welded 316 / 316L Stainless Steel Pipes for Liquid GB/T 12771 SPEC: Material:304/304L 316/316L Diameter : 4-1200mm Wall thickness : 0.3-200mm Length : 2-12m Upon customer's request Tolerance: According to the following tables or customers’ request. Table 1 Tolerance of OD Classification D Permissible Tolerance A B H All Dimensions ±0.5% or ±0.20 ±0.75% or ±0.30 T ＜40 ±0.20 ±0.30 ≥40~＜65 ±0.30 ±0.40 ≥65~＜90 ±0.40 ±0.50 ≥90~＜168.3 ±0.80 ±1.00 ≥168.3~
हीट एक्सचेंजर के लिए फेरिटिक / मार्टेनस्टिक सटीक स्टेनलेस स्टील ट्यूबिंग
ASTM A268 Seamless and Welded Ferritic and Martenstic Stainless Steel Tubing for General Service Brand : TORICH Standard: ASTM A268 O.D: 12.7-203mm Normal W.T : 5.1mm Application : For boiler and heat-exchange Tolerance of Size Group Size,O.D in(mm) Permissible Variations in O.D in (mm) 1 up to1/2(12.7) ,excl +/- 0.005(0.13) 1/2 to 1,1/2(12.7 to38.1),excl +/- 0.005(0.13) 2 1,1/2 to 3,1/2 (38.1 to 88.9) excl +/- 0.01 (0.25) 3 3,1/2 to 5,1/2(88.9 to 139.7) excl +/-0.015(0.38) 4
Tp304 Tp304h Tp306l स्टेनलेस स्टील ट्यूब सीमलेस ओड के साथ 3.18 - 219.1 मिमी
TP304 TP304H TP306L Austenitic Steel Products Staninless Steel Tube Products Available Size : O.D 3.18-219.1mm W.T 0.3-20 mm L 20 meter Max Available Specification: ASTM A213/A213M ASME SA213/SA 213M ASTM A269 ; EN 10216-5 ; GOST 9941-81 ; JIS 3459 Grade and Applications: GRADE APPLICATIONS TP304 Traffic barriers, water pipes TP304H Higher carbon content than 304L,for increased strength,particularly at elevated temperatures TP304L Chemical plant and food processing equipment
